E glass Fiberglass Chopped Strand Mat for FRP products, Boat Building, Auto Parts
Chopped strand mat (or CSM as it is often known) is the most widely used of all composite reinforcement materials.Short strands of glass are randomly scattered and bound to create a mat which can then be wetted out with resin and used as a general purpose reinforcement for traditional fibreglass (GRP/FRP) moulds or parts.
Moistrure: |
AEMC100 |
Weight: |
3.5oz. per sq/ft or 340grams per sq/m |
Width: |
up to 3300mm |
Loss on Ignition: |
5-11% |
Moistrure: |
≤0.5% |
Serial data
Model No. |
Weight |
Width |
Loss on Ignition |
Moistrure |
Net Weight per Roll |
Use And Craftwork |
(grams per sq/m) |
(inch) |
(mm) |
(%) |
(%) |
(lb) |
(kg) |
AEMC |
100/150/200/220 |
41-102 |
1040-2600 |
4-10 |
≤0.2 |
66 |
30 |
Specialized for Automotive |
EMC-E |
300/450/600 |
41-102 |
1040-2600 |
2-6 |
≤0.2 |
66 |
30 |
Specialized for Transformer |
EMC-R |
200/300/450 |
41-102 |
1040-2600 |
2-5 |
≤0.2 |
66 |
30 |
Hand Lay-up / FRP |
EMC-M |
200-900 |
41-102 |
1040-2600 |
2-5 |
≤0.2 |
66 |
30 |
Mode |
1)Uniform density ensures mechanical properties of the composites products. 2)Excellent flexibility ensures good moldability with no spring-back at sharp corners. 3)Fast and comsistent wet-out speed in resins and rapid air release reduce resin comsumption . 4)The composite products have high dry and wet tensile strength and good transparency.
Rich export experience
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Question 1: Are you a factory or a trade company?
Answer: We are a factory and have our top sales for the trade service.
Question 2: Can I try to get a SAMPLE before the order?
Answer: Sure. You can ask for the samples. Usually they're free.
Question 3: How about the lead time?
Answer: Within5-7 days after getting the prepayment.
Question 4: Where is your factory located? How can I visit there?
Answer: Our factory is located in Nanjing, Jiangsu, China. You can fly to Nanjing airport directly.
Welcome to your visit!
Question 5:Can you customize the product according to our needs?
Answer:Of course,Our company has more than ten years of experienced R & D design team, can customize products according to your needs.