Fiberglass Chopped Strand Mat:
Chopped strand mat (or CSM as it is often known) is the most widely used of all composite reinforcement materials.Short strands of glass are randomly scattered and bound to create a mat which can then be wetted out with resin and used as a general purpose reinforcement for traditional fibreglass (GRP/FRP) moulds or parts.
Basic Parameters:
Model No.: |
EMC335 |
Weight: |
11oz. per sq/ft or 335grams per sq/m |
Width: |
up to 130" or up to 3300mm |
Net Weight per roll: |
66lbs±1.1lbs or 30kg±0.5kg |
Size of the Inner Carton Tube: |
Length 51" * Diameter 3" * Thickness 0.2"
or Length 1300mm * Diameter 76mm * Thickness 5mm |
Serial data
Model No. |
Weight |
Width |
Loss on Ignition |
Moistrure |
Net Weight per Roll |
Use And Craftwork |
(grams per sq/m) |
(inch) |
(mm) |
(%) |
(%) |
(lb) |
(kg) |
AEMC |
100/150/200/220 |
41-102 |
1040-2600 |
4-10 |
≤0.2 |
66 |
30 |
Specialized for Automotive |
EMC-E |
300/450/600 |
41-102 |
1040-2600 |
2-6 |
≤0.2 |
66 |
30 |
Specialized for Transformer |
EMC-R |
200/300/450 |
41-102 |
1040-2600 |
2-5 |
≤0.2 |
66 |
30 |
Hand Lay-up / FRP |
EMC-M |
200-900 |
41-102 |
1040-2600 |
2-5 |
≤0.2 |
66 |
30 |
Mode |
Uses:
Packaging:
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Composite Mat Series:
Model No. |
Weight |
Width |
Loss on Ignition |
Moistrure |
Net Weight per Roll |
Use And Craftwork |
(grams per sq/m) |
(inch) |
(mm) |
(%) |
(%) |
(lb) |
(kg) |
AEMC |
100/150/200/220 |
41-102 |
1040-2600 |
4-10 |
≤0.2 |
66 |
30 |
Specialized for Automotive |
EMC-E |
300/450/600 |
41-102 |
1040-2600 |
2-6 |
≤0.2 |
66 |
30 |
Specialized for Transformer |
EMC-R |
200/300/450 |
41-102 |
1040-2600 |
2-5 |
≤0.2 |
66 |
30 |
Hand Lay-up / FRP |
EMC-M |
200-900 |
41-102 |
1040-2600 |
2-5 |
≤0.2 |
66 |
30 |
Mode |
Production Feature
1.Excellent compatibility with resin.the surface of the product is smooth,the sealing is good,and the water and chemical resistance are strong.
2.Excellent heating resistance.
3.Good resin permeability,fast soaking speed,faster curing speed and higher production efficiency.
4.Good overmolding performance,easy to cut,easy to operate,suitable for making various shapes and complex products.